This video aims to introduce the operational steps of different functional modes of Naviforce watch.
We got the NF9135 with four functional modes, ranging from Time Display Mode, Chronograph Mode, Alarm Mode to Time Setting Mode.
Firstly, I am supposed to present you the key components involved during this adjustment process.
The button on the top left side of the watch is named button A.
In counterclockwise order, the second button is button B, the third one is button C and the fourth one is button D.
The mark displayed in this area is a simple criteria for judging what function is operated.
Locate the button B and press it to change your watch into the mode you want.
When the week mark appears on the display with a flashing number in the lower right corner, it turns out that the watch is in the Time Setting Mode.
Press B to switch into Time Display Mode, in which the number in the lower right corner will not blink.
When ST appears, it indicates the Chronograph Mode, AL indicates Alarm Mode.
Next, I will show you how to set the time, such as 17:10 of November 28.
First of all, press button B to select the Time Setting Mode.
“Second” will blink.
You can press D to adjust “Second” to be zero.
And then press C to select the other items in turn.
Press button D to adjust the flashing item, like adjusting the value of hour to be 17.
It will cycle through settings in order from the least to greatest, (like 1 minute to 59 minutes)
The hour setting is done. Press C to switch into “minute” and adjust it to be 10.
switch into “month”; choose November,
date is 28
Switch into week. It is on the left area. Press D to choose the week. Wednesday
When setting “Hour”, the display of “H” on the right area indicates 24-hour Time Format; “A” or “P” indicates 12-hour Time Format.
Finally, press button B to confirm and return to Time Display Mode.
Press B button to select the Chronograph Mode.
Press button D to start timing and press button D again to stop timing. When stopping timing, press C to reset the mode.
If you would like to have split timing measurement, press button D to start timing firstly.
Press C to activate split timing measurement with the signal of SPL.
Press C to deactivate the split timing measurement.
Press D to stop the timing and press C to reset the mode finally.
If you want to get the finish time of two competitors, you need to press button D to start timing.
And press C to activate split timing measurement when the first competitor breasts the tape, indicating his finish time.
When the second competitor breasts the tape, please press D.
And press C again to deactivate the split time measurement, indicating the finish time of the second competitor.
Press C to reset the mode in the end.
If the chronograph is not stopped, it will continue to test the time. And when it reaches the limit, it will restart timing again from zero.
Press B button to select the Alarm Mode.
When we press D and a horizontal line will appear on the label of ALM in the upper right corner, it turns out that the alarm function has been activated.
When we press D again and a horizontal line appears on the label of SIG, the hourly chime function would be activated.
When we press D one more time, both of two functions will be activated.
If you want to deactivate both of them, please press D.
If you would like to set the Alarm, such as 7:20.
Press C and “Hour” will blink. press D to adjust the the hour to be 7. Press C to switch into Minute, adjust it to be 20.
Finally, press button C to confirm.
When reaching the preset time, the watch will alarm for 20 seconds
Press one of the A, C, D buttons to stop the alarm.
When activating snooze function. The watch will alarm for 20 seconds again after the normal state of five minutes.